Aegis AEGIS 1000 El manual del propietario descargar pdf (Pagina 32)

Next, the display shows the A/D reading for the battery voltage, phone line voltage, AC power on, bell, and fuse:

BAT: 225 PHONE: 140

ACON: 82 BELL: 215 ×

FUSE: 222

The next series of displays shows the current analog reading for each security zone input. The displays show the readings for

zones 1-32.

1= 46 2= 47 3= 46

4= 45 5= 46 6= 47 ×

THROUGH

19= 47 20= 48 21= 47

22= 46 23= 46 24= 47 ↑

The normal loop reading for a zone is between 36 - 59 when the zone is secure. Each reading should be changing only by two or

three counts from its average steady reading. When a door or window is opened, the reading will go to a value that represents that

zone being open. If Zone 8 is a Supervised Fire Zone, the normal reading is between 26 – 43 when the zone is secure.

This feature can be used to monitor the quality of the zone wiring and contacts. If the numbers begin to deviate from their

original values when the system was new, wiring problems that will eventually lead to trouble or false alarms may be developing.

You may wish to record the Status | Test values for future reference.

5 = TEMP (TEMPERATURE)

The Temperature Status menu allows you to view and scroll through the status of each Thermostat, PESM, and Temperature

Sensor. To enter the Temperature menu, from the Status menu, press the 5 key on the console keypad. The system will display:

TSTAT 1 TEMP:80 ↓

HEAT:60 COOL:82

You may enter a unit number to start displaying the status with that unit, or simply press the down arrow key to scroll through the

list of temperature zones. The status display is as shown under Temperature Control, except that now the arrow keys may be used

to continue scrolling.

TSTAT 1

MODE: AUTO FAN: AUTO ×

At this point, you may press the ' # ' key to control the temperature zone as specified under Temperature Control.

6= ENERGY (ENERGY COST)

The Energy Cost Status menu allows you to view the current energy rate in use.

ENERGY COST: MID

The Energy Cost will display Lo, Mid, Hi or Crit (for critical) energy rates.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 72 73

Sin comentarios

Aegis AEGIS 1000 El manual del propietario Pagina 32