Aegis AEGIS 1000 Manual de instalación descargar pdf (Pagina 38)

Page 38

To disable the digital communicator for a specific zone, set the alarm code to 0 or 00. The digital dialer will

not report when this zone is tripped.

ZONE 1 ALARM CODE: 01

0-FF ×

THROUGH

USER 8 CLOSE CODE: 68

0-FF ↑

SETUP TEMPERATURES

To configure temperatures from the Installer Setup Menu, press the 5 (Temp) key.

TEMPERATURE DISPLAY

This allows you to choose between Fahrenheit or Celsius temperature format.

TEMPERATURE DISPLAY: 1

1=FAHRENHEIT 2=CELSIUS ↓

THERMOSTAT TYPE

If thermostats are part of the system, this item specifies the thermostat type for each thermostat (this enables the thermostat).

For thermostat types, the current setting is shown on the bottom line.

THERMOSTAT 1 TYPE: 1

AUTO HEAT/COOL #=CHNG ×

THERMOSTAT 2 TYPE: 0

NOT USED #=CHNG ↑

To change a thermostat type, use the arrow keys to scroll through the list of thermostat types, then press ' # ' to select a new type.

TYPE NUMBER DESCRIPTION

AUTO HEAT/COOL 1 Automatic changeover heat and cool thermostat

HEAT/COOL 2 Manual changeover heat and cool thermostat

HEAT ONLY 3 Heating only thermostat

COOL ONLY 4 Cooling only thermostat

SETPOINT ONLY 5 Setpoint only thermostat

SETUP MISCELLANEOUS

To configure the miscellaneous installer setup items, from the Installer Setup menu, press the 6 (MISC) key.

INSTALLER CODE

The Installer code allows the installer access to the Installer Setup menu. The Installer code should be changed and not given to

the customer. The Installer code can not be used for remote phone access.

INSTALLER CODE:

0000-9999 0000=DISABLE↓

The default setting for the Installer code is 1 1 1 1.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 49 50

Sin comentarios

Aegis AEGIS 1000 Manual de instalación Pagina 38